How to Attach

How to Attach Your Mini Hippers to Your Phone Case

Follow these simple steps to securely attach your Mini Hippers to your phone case:

1. Choose the Placement:

   • Decide where you want to attach your Mini Hipper on your phone case.
   • Avoid areas that might interfere with your phone's functionality (e.g., camera, buttons).

2. Clean the Surface:

   • Use a soft cloth or cotton pad with rubbing alcohol to clean the area on your phone case where you’ll attach the Mini Hipper.
   • Ensure the surface is dry and free of dust, oil, or debris.

3. Etch the Surface:

   • Lightly scratch the area on your phone case with fine-grit sandpaper or the edge of a metal file.
   • This step helps create a rough texture, allowing the glue to bond more effectively.

4. Apply the Glue:

   • Add a small drop of super glue to the back of your Mini Hipper. Use just enough to cover the contact point—less is more to avoid mess.
   • Be careful not to get glue on your skin.

5. Press and Hold:

   • Firmly press the Mini Hipper onto the etched area of your phone case.
   • Hold it in place for 30-60 seconds to ensure a strong initial bond.

6. Let it Cure:

   • Allow the glue to fully cure according to the glue’s instructions (typically 24-48 hours). Avoid handling the Mini Hipper during this time.

Tips for Best Results:

• Use a high-quality, fast-drying super glue.
• Avoid getting the glue on areas of the case you don’t want to bond.

Your Mini Hipper is now securely attached and ready to show off!